Get Adobe Flash player

Sizes

0.10 mm

Super Ultra-fine, ultra low flow atomizing brass hex nozzle with a stainless steel insert that can be hand tightened and seal with an O-Ring. These 0.10 mm nozzles are ideal for use in high pressure systems in humid climates. This nozzle should not to be used at pressures below 34.48 bars. Typical flow rate is 0.002 m3/hr at 68.95 bars.

0.15 mm

Ultra-fine, ultra low flow atomizing brass hex nozzle with a stainless steel insert that can be hand tightened and seal with an O-Ring. These 0.15 mm nozzles are ideal for use in high pressure systems in humid climates. This nozzle should not to be used at pressures below 34.48 bars. Typical flow rate is 0.003 m3/hr at 68.95 bars.

0.20 mm

Ultra-fine atomizing brass hex nozzle with a stainless steel insert that can be hand tightened and seal with an O-Ring. These 0.20 mm nozzles are ideal for use in high pressure systems in humid climates. This nozzle should not to be used at pressures below 17.24 bars. Typical flow rate is 0.005 m3/hr.

0.30 mm

Fine atomizing brass hex nozzle with a stainless steel insert that can be hand tightened and seal with an O-Ring. These 0.30 mm nozzles are ideal for use in high pressure systems in climate with low humidity. Typical flow rate is 0.006 m3/hr at 68.95 bars.

0.40 mm

Medium-fine atomizing brass hex nozzles with a stainless steel insert and hand tightens with an O-Ring seal. These 0.40 mm nozzles are ideal for use in low pressure systems. Typical flow rate is 0.009 m3/hr at 68.95 bars.

0.50 mm

Medium-fine atomizing brass hex nozzles have a brass body with stainless steel orifice and hand tightens with an O-Ring seal. These 0.50 mm nozzles are ideal for use in low pressure systems. Ideal for use with high pressure pumps in controlling dust in waste transfer stations. Typical flow rate is 0.012 m3/hr at 68.95 bars.

0.60 mm

Medium atomizing brass hex nozzles have a brass body with stainless steel orifice and hand tightens with an O-Ring seal. These 0.60 mm nozzles are ideal for use in low pressure systems. Ideal for use with high pressure pumps in controlling dust in waste transfer stations. Typically has a 0.013 m3/hr at 68.95 bars.

0.70 mm

Medium atomizing brass hex nozzles have a brass body with stainless steel orifice and hand tightens with an O-Ring seal. These 0.70 mm nozzles are ideal for use with high pressure pumps in controlling dust in waste transfer stations. Typically has a 0.013 m3/hr at 68.95 bars.