Sizes
0.10 mm
Super Ultra-fine, ultra low flow atomizing stainless steel hex nozzles that can be hand tightened and seal with an O-Ring. These 0.10 mm nozzles are ideal for use in high pressure systems in humid climates. This nozzle should not to be used at pressures below 34.48 bars. Typical flow rate is 0.002 m3/hr at 68.95 bars.
0.15 mm
Ultra-fine, ultra low flow atomizing stainless steel hex nozzles that can be hand tightened and seal with an O-Ring. These 0.15 mm nozzles are ideal for use in high pressure systems in humid climates. This nozzle should not to be used at pressures below 34.48 bars. Typical flow rate is 0.003 m3/hr at 68.95 bars.
0.20 mm
Ultra-fine atomizing stainless steel hex nozzles that can be hand tightened and seal with an O-Ring. These 0.20 mm nozzles are ideal for use in high pressure systems in humid climates. This nozzle should not to be used at pressures below 17.24 bars. Typical flow rate is 0.005 m3/hr.
0.30 mm
Fine atomizing stainless steel hex nozzles that can be hand tightened and seal with an O-Ring. These 0.30 mm nozzles are ideal for use in high pressure systems in climate with low humidity. Typical flow rate is 0.006 m3/hr at 68.95 bars.
0.40 mm
Medium-fine atomizing stainless steel hex nozzles and hand tightens with an O-Ring seal. These 0.40 mm nozzles are ideal for use in low pressure systems. Typical flow rate is 0.009 m3/hr.